Modification of optical and mechanical surface properties of sputter-deposited aluminum thin films through ion implantation
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- KCISCIEScopus
- 저널 순위
- JCR Q2Scopus Q1
- 저널
- INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING15(5) · pp.889 · 2014
- 피인용
- Web of Science 19KCI 0
- JCR IF
- JCR 2013 1.5
- ISSN
- 2234-7593
저자
- 강태준부산대학교
- 김용협교신저자서울대학교
- 김정길서울대학교
- 이호영서울대학교
- 이재상한국원자력연구소
- 이재형한국원자력연구원
- 한준희한국표준과학연구원
초록
Aluminum (Al) thin films are used widely as an electronic material in a variety of applications because of their high conductivity, optical reflectance and low cost. In the present study, helium (He) and nitrogen (N2) ions were implanted in sputter-deposited Al thin films with different doses and energies, and the changes in the film properties, such as the surface roughness, optical reflectance, hardness and Young's modulus, were investigated. The results showed that the implantation of both ions smooth the surface of Al thin films by decreasing the hillock density, resulting in low global surface roughness. In particular, in the case of He ion implantation, the moderated degradation of optical reflectance was observed compared to the film implanted with nitrogen ion. On the other hand, excessive ion implantation increased the local (short-range) surface roughness, which deteriorated the optical reflectance of the Al films. The continuous stiffness measurement technique in nano-indentation showed that ion implantation increased the hardness near the surface. He ion implantation hardened the surface of the Al thin film, and almost 2 times higher surface hardness was achieved with an ion dose of 10(18) ions/cm(2) at 40 KeV.
키워드
Aluminum thin filmIon implantationHillockSurface roughnessHardnessYoung's modulusRESIDUAL-STRESSELECTROSTATIC ACTUATORSMEMS MIRRORGROWTHAL
식별자
- WoS UID
- 000335564800013
- KCI
- ART001869298



로그인
연구물 목록으로