Cooling channel design of hot stamping tools for uniform high-strength components in hot stamping process
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q2Scopus Q1
- 저널
- INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY70(5-8) · pp.1189 · 2014
- 피인용
- Web of Science 64
- JCR IF
- JCR 2013 1.779
- ISSN
- 0268-3768
저자
- 임우승제1저자Precision Manufacturing Systems Division, Pusan National University, South Korea
- 최홍석Precision Manufacturing Systems Division, Pusan National University, South Korea
- 안석영School of Mechanical Engineering, Pusan National University, South Korea
- 김병민교신저자School of Mechanical Engineering, Pusan National University, South Korea
초록
Although high strengths up to 1,500 MPa can be obtained by means of hot stamping, the strength and uniformity of components cannot be guaranteed during mass production if the cooling channel is not properly designed. In this paper, we propose a method for designing the cooling channel by means of the energy balance principle and arrangement methods such as the triangular method, tool split, and the connection rule for 2D sections to improve the strength and uniformity of hot stamped components. Two separate approaches for designing the cooling channel are suggested. One is to reduce facility and maintenance costs, and the other is to reduce the cooling cycle time, which critically affects productivity. These approaches were applied to hot stamping tools for manufacturing a roof side that is used as part of the structure of an automobile. Cooling performance and cooling uniformity of the designed cooling channel were verified with finite element simulation. Finally, hot stamping tools for manufacturing a roof side were designed to reduce cooling cycle time and were then manufactured to verify the proposed design methods. A roof side was manufactured by means of the hot stamping tools with the designed cooling channel, and the strength and the uniformity of the component were evaluated by means of a tensile test, observation of the microstructure, and measurement of the micro-Vickers hardness.
키워드
Hot stampingCooling channelUniform strengthEnergy balance principleTriangular methodTool splitRoof sideOPTIMIZATIONSYSTEMPART
식별자
- WoS UID
- 000330841500036



로그인
연구물 목록으로