Effect of substrate temperature on microstructure and optical properties of nanocrystalline alumina thin films
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q1Scopus Q1
- 저널
- CERAMICS INTERNATIONAL39(8) · pp.9017 · 2013
- 피인용
- Web of Science 54
- JCR IF
- JCR 2012 1.789
- ISSN
- 0272-8842
저자
- Balakrishnan, G.제1저자창원대학교, Dept Mech Engn, KO
- Sundari, S. TripuraIndira Gandhi Ctr Atom Res, Surface & Nanosci Div, Kalpakkam 603102, II
- Ramaseshan, R.Indira Gandhi Ctr Atom Res, Surface & Nanosci Div, Kalpakkam 603102, II
- Thirumurugesan, R.Indira Gandhi Ctr Atom Res, Phys Met Grp, Mat Synth & Struct Characterizat Div, II
- Mohandas, E.Indira Gandhi Ctr Atom Res, Phys Met Grp, Mat Synth & Struct Characterizat Div, II
- Sastikumar, D.Natl Inst Technol, Dept Phys, Tiruchchirappalli 620015, II
- Kuppusami, P.사티아바마대학교, Ctr Nanosci & Nanotechnol, Madras 600119, II
- 김태규부산대학교, 나노과학기술대학, 나노메카트로닉스공학과, KO
- Song, J. I.교신저자창원대학교, Dept Mech Engn, KO
초록
Aluminum oxide (Al2O3) thin films were deposited on silicon (100) and quartz substrates by pulsed laser deposition (PLD) at an optimized oxygen partial pressure of 3.0 x 10(-3) mbar in the substrate temperatures range 300-973 K. The films were characterized by X-ray diffraction, transmission electron microscopy, atomic force microscopy, spectroscopic ellipsometry, UV-visible spectroscopy and nanoindentation. The X-ray diffraction studies showed that the films deposited at low substrate temperatures (300-673 K) were amorphous Al2O3, whereas those deposited at higher temperatures (>= 773 K) were polycrystalline cubic gamma-Al2O3. The transmission electron microscopy studies of the film prepared at 673 K, showed diffuse ring pattern indicating the amorphous nature of Al2O3. The surface morphology of the films was examined by atomic force microscopy showing dense and uniform nanostructures with increased surface roughness from 0.3 to 2.3 nm with increasing substrate temperature. The optical studies were carried out by ellipsometry in the energy range 1.5-5.5 eV and revealed that the refractive index increased from 1.69 to 1.75 (lambda=632.8 nm) with increasing substrate temperature. The UV-visible spectroscopy analysis indicated higher transmittance ( >80%) for all the films. Nanoindentation studies revealed the hardness values of 20.8 and 24.7 GPa for the films prepared at 300 K and 973 K respectively. (C) 2013 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
키워드
Optical propertiesThin filmsAluminaPulsed laser depositionX-ray diffractionCHEMICAL-VAPOR-DEPOSITIONPULSED-LASER DEPOSITIONCATHODIC VACUUM-ARCELECTRON-BEAM EVAPORATIONSOL-GEL METHODOXIDE-FILMSSPRAY-PYROLYSISAL2O3 FILMSDIELECTRIC-PROPERTIESSPUTTER-DEPOSITION
식별자
- WoS UID
- 000325835100061



로그인
연구물 목록으로