본문 바로가기

Thermal conductivity of anodized aluminum oxide layer: The effect of electrolyte and temperature

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q2Scopus Q1
저널
MATERIALS CHEMISTRY AND PHYSICS141(2-3) · pp.680 · 2013
피인용
Web of Science 46
JCR IF
JCR 2012 2.072
ISSN
0254-0584

저자

  1. 이정훈제1저자부산대학교, 공과대학, 재료공학부, KO
  2. 김용환부산대학교, 공과대학, 재료공학부, KO
  3. Jung, Uoochang한국생산기술연구원, KO
  4. 정원섭교신저자부산대학교, 공과대학, 재료공학부, 금속공학전공, KO

초록

Thermal conductivity of aluminum anodic oxide layers were measured using a steady-state method. The effects of chemical composition and oxide layer porosity, varied by electrolysis conditions, on thermal conductivity were analyzed. Measured thermal conductivities of oxide layers produced using different electrolytes were as follows; 1.31-1.62 W m(-1) K-1 for oxalic acid, 0.53-1.01 W m(-1) K-1 for sulfuric acid and 0.82-1.12 W m(-1) K-1 for mixed acid; values depended on electrolyte temperature. Oxide layers with higher porosities and O/Al ratios (a measured value of the amount of hydrated Al2O3 present) had lower thermal conductivities. Increasing electrolyte temperatures decreased O/Al ratios but the oxide layer became more porous. A reduction of the hydrated Al2O3 is believed to restrict a considerable decrease of thermal conductivity of oxide layer with increase of the porosity by increase of electrolyte temperature. The presence of sulfate chemicals in the oxide layer from the sulfuric acid containing electrolyte reduced thermal conductivity as compared with oxalic acid. (C) 2013 Elsevier B.V. All rights reserved.

키워드

Thermal conductivityElectrochemical techniquesOxidesCoatingsENVIRONMENTAL-CONDITIONSATMOSPHERIC CORROSIONLASER IRRADIATIONWIDE-RANGEALLOYSFABRICATIONCOATINGSFILMSANODIZATIONCOMPOSITES

식별자

WoS UID
000323806600013