Plasticization of poly(lactic acid) (PLA) through chemical grafting of poly(ethylene glycol) (PEG) via in situ reactive blending
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q1Scopus Q1
- 저널
- EUROPEAN POLYMER JOURNAL49(8) · pp.2356 · 2013
- 피인용
- Web of Science 156
- JCR IF
- JCR 2012 2.562
- ISSN
- 0014-3057
저자
- 최경만제1저자Department of Polymer Science and Engineering, Pusan National University, South Korea
- Choi, Myeon-CheonKorea Institute of Footwear and Leather Technology, South Korea
- Han, Dong-HunKorea Institute of Footwear and Leather Technology, South Korea
- Park, Tae-SungKorea Institute of Footwear and Leather Technology, South Korea
- 하창식교신저자Department of Polymer Science and Engineering, Pusan National University, South Korea
초록
Poly(lactic acid) (PIA) was grafted by low molecular weight acrylated-poly(ethylene glycol) (PEG) via a reactive blending to improve its plasticity. The acrylated-PEG grafted onto PLA was confirmed by the result of nuclear magnetic resonance (NMR) spectra, Fourier transform infrared (FTIR) spectra, wide-angle X-ray diffraction (WAXD) patterns as well as solvent extraction. The properties of the grafted PLAs (PLEAS) were investigated through tensile testing (UTM), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and hydrolytic degradable analysis. The glass transition temperature (T-g) of the PLEAs significantly decreased by more than 20 degrees C and the glass transition exhibits at a broad temperature range between 15 and 56 degrees C. The Young's modulus of PLA was lowered by 66% from 1.2 GPa to 0.4 GPa, while the elongation at break of PIA was increased by 380% from 4.7% to 17.9%. (c) 2013 Elsevier Ltd. All rights reserved.
키워드
Poly(lactic acid)Polyethylene glycolAcrylateReactive blendingGraftingTHERMAL-PROPERTIESRHEOLOGICAL PROPERTIESMECHANICAL-PROPERTIESTRIBUTYL CITRATEPOLYLACTIDE PLACRYSTALLIZATIONEXTRUSIONFILMSMORPHOLOGYSYSTEMS
식별자
- WoS UID
- 000322503800048



로그인
연구물 목록으로