Effect of aluminum addition to solution-derived amorphous indium zinc oxide thin film for an oxide thin film transistors
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q2Scopus Q1
- 저널
- MICROELECTRONIC ENGINEERING109 · pp.189 · 2013
- 피인용
- Web of Science 28
- JCR IF
- JCR 2012 1.224
- ISSN
- 0167-9317
저자
- 박성민제1저자Department of Electronic Engineering, Pusan National University, South Korea
- 이동희Department of Electronic Engineering, Pusan National University, South Korea
- 임유성Department of Electronic Engineering, Pusan National University, South Korea
- 김대국Department of Electronic Engineering, Pusan National University, South Korea
- 이문석교신저자Department of Electronic Engineering, Pusan National University, South Korea
초록
Aluminum-doped indium zinc oxide (IZO) thin film transistors (TFTs) were fabricated to examine the effect of aluminum incorporation in the solution-derived channel layer of TFTs. The IZO channel layer containing aluminum was amorphous. The addition of aluminum suppressed the carrier concentration of the channel layer and affected the electrical characteristics of the TFTs. The bottom-gate TFTs were manufactured on highly doped n-type silicon wafers coated with a SiO2 layer as a gate insulator. An aluminum-doped IZO solution was spin coated on the SiO2 layer and annealed in air. The molar ratio of aluminum-versus-indium-versus zinc was changed to determine the optimized molar ratio of a channel layer of TFTs depending on the annealing temperature and layer thickness. The optimized aluminum-doped indium zinc oxide TFTs exhibited a high on/off current ratio of similar to 3.0 x 10(6), a threshold voltage of similar to 2 V and a low subthreshold swing of 0.76 V/dec, respectively. (C) 2013 Elsevier B.V. All rights reserved.
키워드
Solution-derived thin film transistorsAl-IZOOxide TFTAmorphous oxide TFTHIGH-PERFORMANCEZNO
식별자
- WoS UID
- 000321229200050



로그인
연구물 목록으로