본문 바로가기

Direct fabrication of thin film gold resistance temperature detection sensors on a curved surface using a flexible dry film photoresist and their calibration up to 450 degrees C

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q1Scopus Q1
피인용
Web of Science 16
JCR IF
JCR 2012 1.79
ISSN
0960-1317

저자

  1. 안철희제1저자School of Mechanical Engineering, Pusan National University, South Korea
  2. 박현욱School of Mechanical Engineering, Pusan National University, South Korea
  3. Kim, H. H.School of Mechanical Engineering, Pusan National University, South Korea
  4. 박상후School of Mechanical Engineering, Pusan National University, South Korea
  5. 손창민School of Mechanical Engineering, Pusan National University, South Korea
  6. 김문찬Department of Naval Architecture and Ocean Engineering, Pusan National University, South Korea
  7. Lee, J. H.Department of Thermal Systems, Energy Plant Research Division, Korea Institute of Machinery and Materials (KIMM), South Korea
  8. 고정상교신저자School of Mechanical Engineering, Pusan National University, South Korea

초록

High efficiency heat exchangers, such as intercoolers and recuperators, are composed of complex and compact structures to enhance heat transfer. This limits the installation of conventional temperature sensors to measure the temperature inside the heat exchanger without flow disturbance. To overcome this limitation, we have developed a direct patterning method in which metal is sputtered onto a curved surface using film photoresist and the fabrication of thin film Au resistance temperature detection (RTD) temperature sensors. A photosensitive film resist has been used to overcome the difficulty of 3-dimensional photolithography on a curved surface. The film resist after 2-dimensional photolithography is laminated over an alumina rod which is deposited with Au as an RTD sensing material. The Au metal is etched chemically, and the film resist is removed to form the thin film Au-RTD temperature sensors. They are calibrated by measuring the resistance change against temperature in a thermally controlled furnace. The second order polynomial fit shows good agreement with the measured temperatures with a standard deviation of 0.02 for the temperature range of 20-450 degrees C.

키워드

HEAT-EXCHANGER SURFACESCONDUCTIVITYPERFORMANCECOEFFICIENTMODULUSSILICON

식별자

WoS UID
000319451300031