본문 바로가기

Solidification and segregation behaviors in 6061 aluminum alloy

문서 유형
연구출판물 · 학술지 논문
등재
KCISCIEScopus
저널 순위
JCR Q1Scopus Q1
저널
METALS AND MATERIALS INTERNATIONAL19(3) · pp.433 · 2013
피인용
Web of Science 14KCI 2
JCR IF
JCR 2012 1.434
ISSN
1598-9623

저자

  1. 서희식Busan National Universtity
  2. Jiho GuChangwon National University
  3. Kyungmi ParkChangwon National University
  4. 정연길Changwon National University
  5. 이재현교신저자창원대학교
  6. 정원섭부산대학교

초록

The characteristics of a solid/liquid interface established during directional solidification were investigated in a 6061 aluminum alloy (Al6061 alloy) in which interface patterns, such as planar, cellular and dendritic, form in the mushy zone. Directional solidification experiments were carried out in alumina tubes with an inner diameter of 5 mm to obtain the different microstructures for varying growth rates under an imposed thermal gradient of 9.45 K/mm. As a consequence, primary arm spacing, secondary arm spacing and the length of primary arm were measured for steady-state growth conditions. Furthermore, the solute concentration profiles for the final solidification region were obtained using a SEM-EDS system in order to examine the segregation behaviors of alloying elements. Therefore, it was found that the degree of segregation in the Al6061 alloy was dependent on the growth rate under given solidification conditions, that is, the elemental segregation became more severe with increasing growth rate in the interdendritic region.

키워드

alloyssolidificationmicrostructuresegregationundercoolingREINFORCED CAST METALSHEAT-FLOWSTABILITYDENDRITEGROWTHALCONVECTIONDIFFUSIONINTERFACE

식별자

WoS UID
000318413900008
KCI
ART001769075