본문 바로가기

Improvement of mechanical properties of Al6061 extrudate by die cooling with N-2 gas during hot extrusion

문서 유형
연구출판물 · 학술지 논문
등재
KCISCIEScopus
저널 순위
JCR Q3Scopus Q2
피인용
Web of Science 32
JCR IF
JCR 2012 0.616
ISSN
1738-494X

저자

  1. 고대훈제1저자부산대학교, 공과대학, 기계공학부, KO
  2. Kang, Boung-HoInterdisciplinary Dept Innovat Mfg Engn, KO
  3. 고대철부산대학교, 나노과학기술대학, 나노메카트로닉스공학과, KO
  4. 김병민교신저자부산대학교, 공과대학, 기계공학부, 정밀가공시스템전공, KO

초록

In this study, the mechanical properties of the extrudate are improved by correcting the defects such as abnormal grain growth (AGG). Die cooling with N-2 gas is conducted to control the extrusion temperature during the hot extrusion of Al6061 in order to obtain fine grains of the extrudate. Computational fluid dynamics (CFD) is conducted to evaluate the effect of die cooling with N-2 gas and to determine the relationship between AGG and the extrusion temperature. The optimal cooling channel with a high cooling effect is designed by using the design of experiment (DOE) method, and thermo-mechanical analysis is performed to predict the extrusion temperature. A hot extrusion experiment is also carried out to measure the extrusion temperature and to observe the microstructure of the extrudate. The extrusion temperature predicted from the thermo mechanical analysis is found to be in good agreement with the measured extrusion temperature. The process condition required to reduce the AGG is determined on the basis of the distribution of the evolved microstructure in the hot extrusion experiment. The results confirm the relationship between the distribution of AGG and the mechanical properties of the extrudate. It is confirmed that the mechanical properties of Al6061 can be improved by the application of die cooling with N-2 gas during the hot extrusion process.

키워드

Abnormal grain growthAluminum hot extrusionDie coolingCFD analysisCooling channelHard disk armMICROSTRUCTURE ANALYSISALUMINUM EXTRUSIONALLOYSPREDICTIONEVOLUTIONSIMULATIONAA6060SIZE

식별자

WoS UID
000313795000018