본문 바로가기

FMEA for the reliability of hydroformed flanged part for automotive application

문서 유형
연구출판물 · 학술지 논문
등재
KCISCIEScopus
저널 순위
JCR Q3Scopus Q2
피인용
Web of Science 8KCI 3
JCR IF
JCR 2012 0.616
ISSN
1738-494X

저자

  1. 주병돈제1저자부산대학교, 공과대학, 기계공학부, KO
  2. 김상윤부산대학교, 공과대학, 기계공학부, KO
  3. 김수희부산대학교, 공과대학, 기계공학부, KO
  4. 문영훈교신저자부산대학교, 공과대학, 기계공학부, 정밀가공시스템전공, KO

초록

Tube hydroforming technology is widely used in the automotive industries due to its advantages such as weight reduction, increased strength, improved quality, and reduced tooling cost compared to conventional manufacturing technology. The hydroformed parts often have to be structurally joined at some point. Therefore, the hydroformed automotive parts which have a localized attachment flange are useful. In many cases, the parts formed by hydroforming process are directly related with structural safety, reliability of hydroformed parts must be considered. In this study, hydroforming process of flanged rectangular parts was designed and process reliability was investigated. Finite element analysis was performed to optimize tool geometry considering process parameters such as die aspect ratio and pressure conditions with Dynaform 5.5. Hydroforming experiments to fabricate a flanged rectangular part were performed with optimized tool geometry. The relationship between process parameters and defect was analyzed by FMEA (failure modes and effects analysis). The result shows that process condition was optimized and reliability of rectangular part was increased.

키워드

Tube hydroformingFlanged partFMEAReliabilityFINITE-ELEMENT-ANALYSISALUMINUMSTEELOPTIMIZATIONPREDICTIONBEHAVIORTUBES

식별자

WoS UID
000313795000008
KCI
ART001729076