본문 바로가기

In situ fabrication of freestanding single-walled carbon nanotube rope interconnection

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q2Scopus Q1
피인용
Web of Science 1
JCR IF
JCR 2011 1.463
ISSN
1862-6300

저자

  1. Kim, Taewoo제1저자서울대학교, Sch Mech & Aerosp Engn, KO
  2. Kang, Tae June교신저자서울대학교, Sch Mech & Aerosp Engn, KO
  3. Seo, Dong Kyun서울대학교, Sch Mech & Aerosp Engn, KO
  4. Jang, Eui Yun서울대학교, Sch Mech & Aerosp Engn, KO
  5. Jin, Kyoung Cheol서울대학교, Dept Chem Educ, KO
  6. Choi, Ajeong서울대학교, Dept Phys & Astron, KO
  7. 김대원부산대학교, 부속연구소, 미래핵심기계부품소재산학공동사업단, KO
  8. Park, Yung Woo서울대학교, Dept Phys & Astron, KO
  9. Jeong, Dae Hong서울대학교, Dept Chem Educ, KO
  10. Kim, Yong Hyup서울대학교, Sch Mech & Aerosp Engn, KO

초록

A single-walled carbon nanotube rope interconnect is fabricated by utilizing dielectrophoresis and capillary condensation. The rope connects a pair of prefabricated cantilevers with good alignment and outstanding packing density. The diameter and resistance of the rope are readily controlled by adjusting the dielectrophoresis parameters such as applied voltage and frequency. The properties of the rope, including packing density, electron transport, and maximum current density, are investigated. The maximum current density of the rope is measured to be as high as 1 x 10(7) A/cm(2) in vacuum. (C) 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

키워드

carbon nanotubesdielectrophoresisinterconnectsDIELECTROPHORESISDISSOLUTIONCOMPOSITESMECHANISMTRANSPORTWIRES

식별자

WoS UID
000313729800014