Improved long-term durability of a parallel-type dye-sensitized solar cell module using a platinum metal grid fabricated by direct current magnetron sputtering with heat treatment
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q1Scopus Q1
- 저널
- JOURNAL OF POWER SOURCES222 · pp.333 · 2013
- 피인용
- Web of Science 19
- JCR IF
- JCR 2012 4.675
- ISSN
- 0378-7753
저자
- 손민규제1저자Department of Electrical Engineering, Pusan National University, South Korea
- Seo, HyunwoongGraduate School of Information Science and Electrical Engineering, Kyushu University, Japan
- 김수경Department of Electrical Engineering, Pusan National University, South Korea
- 홍나영Department of Electrical Engineering, Pusan National University, South Korea
- 김병만Department of Electrical Engineering, Pusan National University, South Korea
- 박송이Department of Electrical Engineering, Pusan National University, South Korea
- 프라바카르Department of Electrical Engineering, Pusan National University, South Korea
- 김희제교신저자Department of Electrical Engineering, Pusan National University, South Korea
초록
A parallel-type grid module is used widely in the dye-sensitized solar cells (DSSCs). In most parallel-grid DSSC modules, silver (Ag) is used as the grid metal owing to its high conductivity. On the other hand, Ag is disadvantageous to the durability of the module because it readily undergoes corrosion from the iodide electrolyte that causes electrolyte degradation. In this study, a Ag grid in a parallel DSSC module is replaced by a platinum (Pt) grid to improve the stability of the parallel DSSC module. The Pt grid is fabricated by direct current magnetron sputtering with substrate heat treatment. Although the sheet resistance of the Pt grid is slightly higher than that of the Ag grid, the Pt grid is effective as a grid structure, reducing the internal series resistance in the DSSC. Furthermore, the durability of the Pt grid module is improved, maintaining 41% air mass (AM) 1.5 efficiency after 1700 h, because no electrolyte degradation or corrosion of the grid structure occurs. (C) 2012 Elsevier B.V. All rights reserved.
키워드
Dye-sensitized solar cellParallel-grid modulePlatinum metal gridDirect current magnetron sputteringLong-term durabilityIMPEDANCE SPECTROSCOPYEFFICIENCYELECTROLYTESTABILITYPERFORMANCETRANSPORTDESIGNENERGYLIGHT
식별자
- WoS UID
- 000311129900048



로그인
연구물 목록으로