Member moment capacities of mono-symmetric LiteSteel Beam floor joists with web openings
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q1Scopus Q1
- 저널
- JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH70 · pp.153 · 2012
- 피인용
- Web of Science 16
- JCR IF
- JCR 2011 1.251
- ISSN
- 0143-974X
저자
- 서정관제1저자LRET Research Centre of Excellence, Pusan National University, South Korea
- Mahendran, Mahen교신저자Faculty of Built Environment and Engineering, Queensland University of Technology, Australia
초록
Recently developed cold-formed LiteSteel Beam (LSB) sections have found increasing popularity in residential, industrial and commercial buildings due to their light weight and cost-effectiveness. Another beneficial characteristic is that they allow torsionally rigid rectangular flanges to be combined with economical fabrication processes. Currently. there is significant interest in the use of LSB sections as flexural members in floor joist systems. When used as floor joists, these sections require openings in the web to provide access for inspection and other services. At present, however, there is no design method available that provides accurate predictions of the moment capacities of LSBs with web openings. This paper presents the results of an investigation of the buckling and ultimate strength behaviour of LSB flexural members with web openings. A detailed fine element analysis (FEA)-based parametric study was conducted with the aim of developing appropriate design rules and making recommendations for the safe design of LSB floor joists. The results include the required moment capacity curves for LSB sections with a range of web opening combinations and spans and the development of appropriate design rules for the prediction of the ultimate moment capacities of LSBs with web openings. (C) 2011 Elsevier Ltd. All rights reserved.
키워드
Cold-formed steel structuresLiteSteel BeamWeb openingNonlinear finite element analysisDesign rules
식별자
- WoS UID
- 000301327000016



로그인
연구물 목록으로