본문 바로가기

Etched-Core Fiber Bragg Grating Sensors Integrated With Microfluidic Channels

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q1Scopus Q1
저널
JOURNAL OF LIGHTWAVE TECHNOLOGY30(8) · pp.1025 · 2012
피인용
Web of Science 25
JCR IF
JCR 2011 2.784
ISSN
0733-8724

저자

  1. 이상매제1저자부산대학교, 연구소, 정밀정형 및 금형가공연구소, KO
  2. 정명영부산대학교, 나노과학기술대학, 광메카트로닉스공학과, KO
  3. Saini, Simarjeet S.Univ Waterloo, Waterloo Inst Nanotechnol, Waterloo, CN

초록

In this paper, we demonstrate a fiber Bragg grating sensor for bio-chemical detection. In the sensor area, the fiber has been chemically etched to the core with a diameter of 7 mu m. Due to increased index contrast, the etched-core fiber Bragg grating supports multiple guided modes which respond differently to the refractive index of the surrounding medium, temperature and the strain. An asymmetric adiabatic taper is created between the etched and the unetched parts of the fiber resulting in excitation of both the symmetrical and the asymmetrical modes which can be interrogated with an erbium doped fiber amplifier amplified spontaneous emission source. The sensor is integrated with a Poly-dimethylsiloxane (PDMS) microfluidic channel for introduction of chemicals to be tested. A refractive index sensitivity of 92 nm/riu was achieved using the 3rd order mode. Further the sensor can simultaneously measure the refractive index, temperature and strain to an accuracy of 1 x 10(-4), 0.32 degrees C and 10 mu epsilon assuming a wavelength resolution of 0.01 nm. By using signal processing, these resolutions can be improved by a factor of 10.

키워드

Biosensoretched-core fiber Bragg grating (FBG)evanescent fieldREFRACTIVE-INDEX SENSORSENSITIVITY

식별자

WoS UID
000301197400001