본문 바로가기

Improvement in Dimensional Accuracy of Roll-Die-Formed Clutch Hub Used in Automotive Transmission

문서 유형
연구출판물 · 학술지 논문
등재
KCISCIEScopus
저널 순위
JCR Q2Scopus Q1
피인용
Web of Science 6KCI 0
JCR IF
JCR 2011 1.141
ISSN
2234-7593

저자

  1. 고대훈부산대학교
  2. 고대철교신저자부산대학교
  3. 이상곤한국생산기술연구원
  4. 권용남Korea Institute of Materials Science
  5. 김상우한국기계연구원부설 재료연구소
  6. 김봉환경남과학기술대학교
  7. 김병민부산대학교

초록

Roll die forming is investigated as a new process for manufacturing a clutch hub: in this process a tooth shape is formed by a deep drawing process using a die set with rotational rolls. Some problems are still encountered during roll die forming. such as a proper process design that takes into consideration the forming limit of sheet material, the improvement in the wear resistance of the punch and the rotational roll, and the control of dimensional accuracy Particularly, the dimensional accuracy of the final product is affected by the clearance between the punch and the roll. Therefore, the objective of this study is to determine the optimal clearance between the punch and the roll for improving the dimensional accuracy during the roll die forming for a clutch hub. FE-simulation and the design of experiment method are employed to determine the optimal clearance required to produce a final product with satisfactory dimensional specifications. An experiment is performed under the same process conditions as the FE-simulation with an optimal clearance to validate the results obtained in this study The results of the FE-simulation are in good agreement with the experimental ones within a maximum error of 5.55[%].

키워드

Roll Die FormingClutch HubFE-SimulationDesign of ExperimentClearanceOPTIMIZATION

식별자

WoS UID
000299756700009
KCI
ART001628470