본문 바로가기

Comparative study on mechanical behavior of low temperature application materials for ships and offshore structures: Part II - Constitutive model

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q1
피인용
Web of Science 15
JCR IF
JCR 2010 2.101
ISSN
0921-5093

저자

  1. 박웅섭제1저자Department of Naval Architecture and Ocean Engineering, Pusan National University, South Korea
  2. 이치승Department of Naval Architecture and Ocean Engineering, Pusan National University, South Korea
  3. Chun, Min-SungSamsung Heavy Industries Co. Ltd., South Korea
  4. 김명현Department of Naval Architecture and Ocean Engineering, Pusan National University, South Korea
  5. 이제명교신저자Department of Naval Architecture and Ocean Engineering, Pusan National University, South Korea

초록

Austenitic stainless steel (ASS), aluminum alloy, and nickel steel alloy are strong temperature-and strain-rate-dependent materials. They exhibit very complicated nonlinear behaviors during plastic deformation. While the typical characteristics of their nonlinear behaviors, including second hardening and strain-rate sensitivity, can be easily identified through experimental investigation, a useful numerical model is not available. The unavailability of such a model is because of the wide variance in the nonlinearities of the materials. In the present study, a unified constitutive model is proposed for representing the temperature-and strain-rate-dependent material nonlinearities in ASS and aluminum and nickel steel alloys. Based on the Bodner model, a strain-hardening function was developed for expressing second hardening as well as strain-rate sensitivity. To provide unified material parameters for the hardening exponent and strain-rate control, a new type of material parameter identification method is proposed. Based on the proposed constitutive model, in conjunction with both a damage model and the material parameters, a verification study is conducted. The experimental results of both Park et al. [1] and Tomita and Iwamoto [2], which are valid within a temperature range of 80-345 K and a strain-rate range of 0.0005-500/s, are compared with the numerical results of this study. Crown Copyright (C) 2011 Published by Elsevier B.V. All rights reserved.

키워드

Cryogenic materialViscoplastic constitutive equationDamage evolution equationTransformation-induced plasticityFinite element analysisSTAINLESS-STEELSTRAIN-RATEDEFORMATIONPREDICTIONPARAMETERSDAMAGE

식별자

WoS UID
000295184000013