본문 바로가기

Current based Compliance Control Method for Minimizing an Impact Force at Collision of Service Robot Arm

문서 유형
연구출판물 · 학술지 논문
등재
KCISCIEScopus
저널 순위
JCR Q2
피인용
Web of Science 21KCI 4
JCR IF
JCR 2010 1.06
ISSN
2234-7593

저자

  1. 제환욱제1저자부산대학교
  2. 백준영부산대학교
  3. 이민철교신저자부산대학교

초록

A motion of a robot manipulator under environment for human and robot to coexist should be able to quickly sense external force and react for minimizing a damage due to physical contacts. In the absence of sensing external force, relative motions between robot and human are not predictable and unexpected collisions may occur at some position during motion of the robot arm. This paper proposes a real-time collision detection method and a compliance control based on detecting abnormal current value to minimize an impact force at the moment of collision between service robot arm and unknown obstacle. In the introduced method, the extra sensors such as the Force/Toque sensor or the visual sensor to detect the collision are not necessary. Instead of these sensors, the collision detection and the safety motion are achieved by a simple method based on the current characteristics in according to operating of each joint motor of robot manipulator. In order to evaluate the performance for minimizing an impact force, the proposed method is applied to the developed light weight robot arm for a service robot.

키워드

Collision DetectionService Robot ArmRobot Arm SafetyCompliance ControlMANIPULATORSSYSTEM

식별자

WoS UID
000288977900010
KCI
ART001537060