Influence of refractory ceramic coatings on high temperature properties of Inconel 617
- 문서 유형
- 연구출판물 · 학술대회 발표논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q1
- 저널
- SURFACE & COATINGS TECHNOLOGY205 · pp.S409 · 2010
- 피인용
- Web of Science 4
- JCR IF
- JCR 2009 1.793
- ISSN
- 0257-8972
저자
- 조현제1저자부산대학교, 나노과학기술대학, 나노메카트로닉스공학과, KO
- Bang, Kwang Hyun한국해양대학교, Div Mech & Informat Engn, KO
- Lee, Byeong Woo한국해양대학교, Dept Mat Engn, KO
초록
TiAlN and Al2O3 thin films (2.5-3 mu m) were deposited on the Inconel 617 by physical vapor deposition methods. The effect of coatings on the thermal stability and wear properties of the Inconel alloy after heat-treatment (annealing) in an air and a helium atmosphere at 1000 degrees C, 48 h has been studied. The uncoated Inconel 617, annealed in both air and helium, showed a poor wear resistance and an inferior thermal stability due to both the formation of inhomogeneous corrosion scales composed of Cr2O3 on the Inconel surface and internal oxides in sub-surface area. Although both the TiAlN and Al2O3 coatings showed an enhanced thermal corrosion resistance and an increased wear resistance for samples annealed in both air and helium, Al2O3 showed much better performance than TiAlN as a protecting layer for the Inconel 617. (C) 2010 Elsevier B.V. All rights reserved.
키워드
Ceramic coatingThin filmInconel 617Thermal propertyCorrosionHelium atmosphereCORROSIONALLOYHELIUM
식별자
- WoS UID
- 000286343200082



로그인
연구물 목록으로