본문 바로가기

Fabrications of Poly(vinylidenefluoride-co-hexafluoropropylene) Nanofibers Containing Inorganic Filler by Electrospinning Technique and Its Application to Dye-Sensitized Solar Cells

문서 유형
연구출판물 · 학술대회 발표논문
등재
SCIEScopus
저널 순위
JCR Q4
저널
MOLECULAR CRYSTALS AND LIQUID CRYSTALS519 · pp.234 · 2010
피인용
Web of Science 12
JCR IF
JCR 2009 0.451
ISSN
1542-1406

저자

  1. 이진국제1저자부산대학교, 공과대학, 고분자공학과, KO
  2. 최형주부산대학교, 공과대학, 고분자공학과, KO
  3. 박성해부산대학교, 공과대학, 고분자공학과, KO
  4. 원두현부산대학교, 공과대학, 고분자공학과, KO
  5. 박현우부산대학교, 공과대학, 고분자공학과, KO
  6. 김정헌부산대학교, 공과대학, 고분자공학과, KO
  7. Lee, Chan-Jong이건창호, Ctr Res & Dev, KO
  8. Jeong, Seong-Hoon이건창호, Ctr Res & Dev, KO
  9. 김미라교신저자부산대학교, 공과대학, 고분자공학과, KO

초록

We prepared Poly(vinylidenefluoride-co-hexafluoropropylene) (PVDF-HFP) nanofibers containing nano-sized inorganic BaTiO3 filler by electrospinning technique, and applied to the dye sensitized solar cells (DSSCs). This technique compensates the draw back of leakage of the electrolyte in DSSCs. Moreover, electrospun PVDF-HFP nanofibers containing inorganic filler have better ionic conductivity than those of without filler, and the DSSC device using inorganic filler showed better efficiency than without inorganic filler. The best result of V-oc, J(sc), FF, and eta of the DSSC devices using the electrospun PVDF-HFP nanofibers containing 20 wt% inorganic BaTiO3 filler were the values of 0.70 V, 12.9mA/cm(2), 0.58 and 5.15% under AM 1.5, respectively. We also measured up-take, ionic conductivity and porosity to investigate the effect of electrolyte in the electrospun nanofibers.

키워드

Dye-Sensitized solar cellselectrospinningPVDF-HFP nanofibers containing nano-sized inorganic fillerCOMPOSITE POLYMER ELECTROLYTESLITHIUM BATTERIESPERFORMANCEOPTIMIZATION

식별자

WoS UID
000277664700034