The Effect of Applied Forging Pressure on Primary Structure Deformation in Rheology Forging Process With Solid Fraction Controlled A356 and AA2024 Alloys
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q2
- 피인용
- Web of Science 2
- JCR IF
- JCR 2009 0.815
- ISSN
- 0094-4289
저자
- 이상매제1저자교신저자Engineering Research Center for Net Shape and Die Manufacturing, Pusan National University, South Korea
- Kim, H. H.Graduate School of Mechanical and Precision Engineering, Pusan National University, South Korea
- 강충길School of Mechanical Engineering, Thixo-Rheo National Research Laboratory, Pusan National University, South Korea
초록
Mechanical properties and microstructure of heat-treated samples of A356 and AA2024 aluminum alloys, which were rheoforged by varying the change in pressure and temperature were investigated, preventing defects such as porosity, liquid segregation, and insufficient filling occurring during rheoforging process. The rheology material was fabricated by an electromagnetic stirring process by controlling stirring current so that shearing force and temperature of the molten metal were controlled during electromagnetic stirring. As a result, by crushing dendrite and rosette type microstructures, fine and globularized rheology material was obtained and the feasibility of the rheoforging process was found to be positive. In the case of the direct rheoforging process, excessive applied forging-pressure caused material spattering, which in turn caused eutectic segregation. This segregation brought about a shrink hole and thus led to a deterioration of mechanical strength. According to varied applied forging pressures, agglomeration phenomena of primary particles of wrought aluminum alloy remarkably increased as compared with an as-cast aluminum alloy.
식별자
- WoS UID
- 000275586200015



로그인
연구물 목록으로