Semi-solid die forging of A16061 wrought aluminium alloy with electromagnetic stirring
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q4
- 저널
- PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE222(9) · pp.1083 · 2008
- 피인용
- Web of Science 13
- JCR IF
- JCR 2007 0.203
- ISSN
- 0954-4054
저자
초록
This study demonstrates the forming process of a semi-solid material with a solid fraction of about 45 per cent after the primary alpha-Al particle in the semi-solid material is globularized during solidification by electromagnetically stirring the molten metal poured out into the sleeve. By theological forming experiments incorporating electromagnetic stirring (EMS) using A16061 alloy, the process parameters are optimized to be of 0.3 m/s of forming velocity, 45 MPa of forming pressure, 10 s of stirring time, and 30 A of stirring current to get the best quality. The product exhibited the highest tensile strength of 312.8 MPa and elongation of 4.51 per cent at positions where the pressure was directly applied to the material and overlapping occurred.
식별자
- WoS UID
- 000260987100004



로그인
연구물 목록으로