본문 바로가기

High cycle fatigue behaviour of microsphere Al2O3-Al particulate metal matrix composites

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q1
저널
COMPOSITES PART B-ENGINEERING39(7-8) · pp.1257 · 2008
피인용
Web of Science 41
JCR IF
JCR 2007 1.311
ISSN
1359-8368

저자

  1. 박봉규제1저자부산대학교, 공과대학, 재료공학부, KO
  2. Crosky, A. G.Univ New S Wales, Sch Mat Sci & Engn, Sydney, AT
  3. Hellier, A. K.Australian Nucl Sci & Technol Org, Inst Mat Engn, Menai, AT

초록

The high-cycle stress-life (S-N) curve and fatigue crack growth threshold (Delta K-th) behaviour of COMRAL-85(TM), a 6061 aluminium-magnesium-silicon alloy reinforced with 20 vol.% Al2O3-based polycrystalline ceramic microspheres, and manufactured by a liquid metallurgy route, have been investigated for a stress ratio of R = -1 (fully reversed loading). Fatigue testing was conducted on both smooth round bar (S-N) specimens and notched round bar (fatigue threshold) specimens. Unreinforced Al 6061-T6 also processed by a liquid metallurgy route and six powder metallurgy processed composites with particle volume fractions ranging between 5% and 30% were also studied. S-N data revealed that the powder metallurgy processed composites generally gave longer fatigue lives than the matrix alloy, whereas COMRAL-85(TM) exhibited a reduced fatigue life. The fatigue threshold results were very similar for all the composites, being lower than for Al 6061-T6. Fatigue failure mechanisms were determined from examination of the fracture surfaces and the crack profiles. (c) 2008 Elsevier Ltd. All rights reserved.

식별자

WoS UID
000259850100021