본문 바로가기

Two-phase flow characteristics in hollow shape fabrication process of metal matrix composites by thixoforging

문서 유형
연구출판물 · 학술대회 발표논문
등재
SCIEScopus
저널 순위
JCR Q4
피인용
Web of Science 3
JCR IF
JCR 2007 0.298
ISSN
1059-9495

저자

  1. Yoon, K. S.제1저자교신저자School of Mechanical Engineering, Thixo-Rheo National Research Lab., Pusan National University, South Korea
  2. 이상매Engineering Research Center for Net Shape and Die Manufacturing, Pusan National University, South Korea
  3. 강충길School of Mechanical Engineering, Thixo-Rheo National Research Lab., Pusan National University, South Korea

초록

Among advanced manufacturing processes of metal matrix composite parts, thixoforging is one of the most effective forming processes. The investigation of this research article is to provide the proper conditions such as the die shape, the forging velocity, the forging time, the forging pressure, and reinforcement content in the thixoforming process for fabricating hollow shape parts. To investigate the effect of injection velocity and pressure on various defects in thixoforged cylinder liners, filling tests were performed by MAGMA S/W. In order to evaluate the effectiveness of calculated conditions, which are given by computer-aided engineering, A380 and SiCp/A380 cylinder liners were fabricated under the calculated conditions. SiCp/A380 composite billets were fabricated by both the mechanical stirring and electro-magnetic stirring processes. In the case of SiCp/A380 composite cylinder liners, the effect of reinforcement (SiCp) distribution, content (10-20 vol.%) and size (5.5-14 mu m) on the mechanical properties was investigated.

식별자

WoS UID
000255746400021