본문 바로가기

Consideration of buckling characteristics for optimal design of stiffened punch in the blanking process of lead frame

문서 유형
연구출판물 · 학술대회 발표논문
등재
SCIEScopus
저널 순위
JCR Q2
저널
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY201(1-3) · pp.273 · 2008
피인용
Web of Science 3
JCR IF
JCR 2007 0.816
ISSN
0924-0136

저자

  1. 고대철나노과학기술대학, 나노메카트로닉스공학과
  2. Lee, IS부산대학교, 공과대학, 기계공학부, KO
  3. 김병민부산대학교, 공과대학, 기계공학부, KO

초록

The recent technical trend of semiconductor, chip size and high performance package technology, requires the IC lead frame to be of more multi-leads and fine pitch, and the corresponding punch thickness has been narrow. The members with high slenderness ratio such as a lead frame punch can be broken suddenly due to buckling. It is the major aim of the present work to suggest a practical optimization procedure to design the punch with the optimal number and position of stiffeners considering the maximum buckling load of punch. The various cases of punches have been also analyzed using finite element method and theoretical model, and the results have been confirmed by buckling test. It is shown that the analytical and theoretical results are in good agreement with the experimental ones. Finally, a guideline to design the punch with stiffeners is proposed through analysis of cross-section of lead frame punch such as moment of inertia and eccentricity., (C) 2008 Published by Elsevier B.V.

식별자

WoS UID
000255737600052