본문 바로가기

Colorless Polyimide/Organoclay Nanocomposite Substrates for Flexible Organic Light-Emitting Devices

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY10(1) · pp.388 · 2010
피인용
Web of Science 23
JCR IF
JCR 2009 1.435
ISSN
1533-4880

저자

  1. 김진회제1저자부산대학교, 공과대학, 고분자공학과, KO
  2. Choi, Myeon-Chon부산대학교, 공과대학, 고분자공학과, KO
  3. 김화정부산대학교, Dept Chem Engn, KO
  4. Kim, Youngkyoo경북대학교, Dept Chem Engn, KO
  5. Chang, Jin-Hae금오공과대학교, Dept Polymer Sci & Engn, Gumi 730701, KO
  6. Han, Mijeong한국화학연구원, Adv Mat Div, KO
  7. 김일부산대학교, 공과대학, 고분자공학과, KO
  8. 하창식교신저자부산대학교, 공과대학, 고분자공학과, KO

초록

We report the preparation and application of indium tin oxide (ITO) coated fluorine-containing polyimide/organoclay nanocomposite substrate. Fluorine-containing polyimide/organoclay nanocomposite films were prepared through thermal imidization of poly(amic acid)/organoclay mixture films, whilst on which ITO thin films were coated on the films using a radio-frequency planar magnetron sputtering by varying the substrate temperature and the ITO thickness. Finally the ITO coated fluorine-containing polyimide/organoclay nanocomposite substrate was employed to make flexible organic light-emitting devices (OLED). Results showed that the lower sheet resistance was achieved when the substrate temperature was high and the ITO film was thick even though the optical transmittance was slightly lowered as the thickness increased. similar to 10 nm width ITO nanorods were found for all samples but the size of clusters with the nanorods was generally increased with the substrate temperature and the thickness. The flexible OLED made using the present substrate was quite stable even when the device was extremely bended.

식별자

WoS UID
000272388700062