본문 바로가기

The Properties of Reactive Hot Melt Polyurethane Adhesives: Effects of Molecular Weight and Reactive Organoclay

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q4
저널
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING48(9) · pp.932 · 2009
피인용
Web of Science 9
JCR IF
JCR 2008 0.456
ISSN
0360-2559

저자

  1. 김태균제1저자부산대학교, Res Ctr, Yangsan, KO
  2. 김병규교신저자부산대학교, 공과대학, 고분자공학과, KO
  3. Kim, Yong SungHwaseung T&C Corp, Res Ctr, Yangsan, KO
  4. Cho, Yang Lae호성케멕스, Ulsan R&D Ctr, KO
  5. Lee, Sang Yun호성케멕스, Ulsan R&D Ctr, KO
  6. Cho, Youn Bok울산대학교, Dept Chem, KO
  7. Jeong, Han Mo울산대학교, Dept Chem, KO

초록

We studied the affect of molecular weight on the adhesion properties of reactive hot melt adhesive (RHA), which has polyurethane prepolymer as its major component. The RHAs that were prepared by the two-shot method and were of a higher average molecular weight showed improved initial bond strength development compared to that of RHAs prepared by the one shot method but with the same recipe. However, the viscosity of the RHA was increased by this method, which reduced the cross-linking in the cured RHA. This was confirmed by its deteriorated tensile properties and increased tan delta value. The reactive organoclay, Cloisite 30B, also improved the initial bond strength development and raised the viscosity of the RHA, thereby reducing cross-linking in the cured RHA.

식별자

WoS UID
000270532200007