Evaluation of microbial fuel cell coupled with aeration chamber and bio-cathode for organic matter and nitrogen removal from synthetic domestic wastewater
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q3
- 저널
- WATER SCIENCE AND TECHNOLOGY60(6) · pp.1409 · 2009
- 피인용
- Web of Science 16
- JCR IF
- JCR 2008 1.005
- ISSN
- 0273-1223
저자
- 차재환제1저자Department of Civil and Environmental Engineering, Pusan National University, South Korea
- 김창원교신저자Department of Civil and Environmental Engineering, Pusan National University, South Korea
- 최수정Department of Civil and Environmental Engineering, Pusan National University, South Korea
- 이길영Department of Civil and Environmental Engineering, Pusan National University, South Korea
- Chen, G.Department of Civil and Environmental Engineering, Pusan National University, South Korea
- 이태호Department of Civil and Environmental Engineering, Pusan National University, South Korea
초록
For simultaneous carbon and nitrogen removal via single stream, a microbial fuel cell (MFC) coupled with an aeration chamber and a bio-cathode was investigated. Without catalysts and any additional buffer, the MFC produced electricity continuously and the power density reached 1.3W/m(3) at a loading rate of 1.6 kg COD/m(3) d. Simultaneously, the COD and the nitrate removal rate were 1.4 kg COD/m(3) d and 67 g NO3-N/m(3) d, respectively. When the hydraulic retention time was changed from 6 to 0.75 hours, the power density significantly increased from 0.2 to 10.8W/m(3) due to an increase of cathodic potential. When the aeration chamber was removed and the nitrate was injected into the cathode, the power density increased to 3.7W/m(3). At a high recirculation rate of 10 ml/min, the power density and the nitrate removal rate greatly increased to 34W/m(3) and 294 g NO3--N/m(3) d, respectively.
식별자
- WoS UID
- 000270132600006



로그인
연구물 목록으로