본문 바로가기

The Effect of Trace Addition of Strontium and Zinc on the Creep Properties of Mg-6Sn-5Al-2Si Alloys

문서 유형
연구출판물 · 학술대회 발표논문
등재
SCIEScopus
저널 순위
JCR Q2
저널
MATERIALS TRANSACTIONS50(6) · pp.1404 · 2009
피인용
Web of Science 4
JCR IF
JCR 2008 0.753
ISSN
1345-9678

저자

  1. 전종진제1저자부산대학교, 공과대학, 재료공학부, KO
  2. 박봉규부산대학교, 공과대학, 재료공학부, KO
  3. 박용호부산대학교, 공과대학, 재료공학부, 금속공학전공, KO
  4. 박익민부산대학교, 공과대학, 재료공학부, 금속공학전공, KO
  5. Oak, Jeong JungTohoku Univ, Inst Mat Res, Sendai, JA
  6. Kimura, HisamichiTohoku Univ, Inst Mat Res, Sendai, JA

초록

Mg alloys containing Mg2Si and Mg2Sn phases are promising inexpensive heat-resistant magnesium alloys for automobile engine applications. This study examined the microstructure and creep properties of Mg-6Sn-5Al-2Si alloys. The microstructures of these alloys were characterized by the presence of thermally stable Mg2Si and Mg2Sn and thermally unstable Mg17Al12 precipitates. Creep tests were performed at 30, 50 and 70MPa at 150, 180 and 200 degrees C. Trace amounts of Sr and Zn were added to these alloys to improve the mechanical properties by modifying the precipitates in the matrix. The influence of the combined addition of Sr and Zn on the microstructure and mechanical properties was also studied. Analyses of the mechanical properties indicated that Sr and Zn addition improved the tensile strength but decreased the creep resistance. [doi:10.2320/matertrans.MRA2008473]

식별자

WoS UID
000268615800034