본문 바로가기

Control of corrosive water in advanced water treatment plant by manipulating calcium carbonate precipitation potential

문서 유형
연구출판물 · 학술지 논문
등재
KCISCIEScopus
저널 순위
JCR Q3
저널
KOREAN JOURNAL OF CHEMICAL ENGINEERING26(1) · pp.90 · 2009
피인용
Web of Science 6KCI 3
JCR IF
JCR 2008 0.83
ISSN
0256-1115

저자

  1. 김도환Pusan National University
  2. 차재환Pusan National University
  3. 홍순헌Pusan National University
  4. 김창원교신저자부산대학교
  5. Dong-Youn KimSamyoung Engineering Consultants Co., LTD.

초록

The corrosion of metal pipes in water distribution networks is a complex electrochemical and physicochemical phenomenon between a metal surface and corrosive water. The level of corrosion in water distribution systems was controlled by manipulating the calcium carbonate precipitation potential (CCPP) concentration, and the corrosive water quality was controlled in two steps within the advanced water treatment plant (AWTP) constructed at the Institute of Water Quality Research (IWQR), Busan Metropolitan City, Korea. The V control step was located before a coagulation process included on a rapid mixer, and the 2(nd) control step was located after a biological activated carbon (BAC) process. The capacity of the AWTP in IWQR was 80 m(3)/day. The CCPP concentration was controlled from the calcium hardness, alkalinity, and pH by adding calcium hydroxide (Ca(OH)(2)), sodium carbonate (Na2CO3), and carbon dioxide (CO) in the above two steps. A CCPP control system was installed and operated according to the developed algorithm to maintain a CCPP range of 0-4 mg/L. The CCPP range was reasonably controlled to induce the fori-nation of a CaCO3 film on the surface of the simulated water distribution system (SWDS). From the result of the corrosive water control, the CCPP formed greater than 0.0 mg/L. The crystalloid structure of the scale produced by CCPP control in the inner surface of pipe was zinc carbonate hydroxide hydrate (Zn4CO3(OH)(6)center dot H2O).

식별자

WoS UID
000262722500015
KCI
ART001313076