본문 바로가기

Mechanical properties and cutting performance of nanocomposite Cr-Si-N coated tool for green machining

문서 유형
연구출판물 · 학술지 논문
등재
KCISCIEScopus
저널 순위
JCR Q2
저널
CURRENT APPLIED PHYSICS9 · pp.S145 · 2009
피인용
Web of Science 18
JCR IF
JCR 2008 1.526
ISSN
1567-1739

저자

  1. 김철부산대학교, 공과대학, 기계공학부, 정밀가공시스템전공, KO
  2. 강명창교신저자부산대학교, 대학원, 융합학부, KO
  3. 김정석부산대학교, 공과대학, 기계공학부, KO
  4. 김광호부산대학교, 공과대학, 재료공학부, KO
  5. 신보성부산대학교, 나노과학기술대학, 광메카트로닉스공학과, KO
  6. Je, T. J.

초록

in this paper, comparative studies on mechanical properties and cutting performance between CrN and Cr-Si-N coatings for green micro end-milling were conducted. Ternary Cr-Si-N coatings, in which Si was incorporated into CrN, were synthesized onto WC-Co substrates using a hybrid system of arc ion plating and sputtering techniques. The high hardness of Cr-Si-N coatings was related to the composite microstructure consisting of the fine CrN crystallites and amorphous Si3N4. The average friction coefficient of Cr-Si-N coatings gradually decreased with increase of Si content in CrN coatings. Cutting tests were carried out to evaluate the characteristics of micro cutting in vertical machining center using ultra-high speed air turbine spindle. An integrated evaluation system of cutting tools was introduced. Consequently, the Cr-Si(9.3 at.%)-N coated end-mill using semi-dry machining showed good cutting performance under ultra-high speed cutting condition. (c) 2008 Elsevier B.V. All rights reserved.

식별자

WoS UID
000262500500043