Study of the microstructure and mechanical properties of Al6061 aluminum alloys rheo-forged by vacuum pump
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q2
- 저널
- MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING497(1-2) · pp.309 · 2008
- 피인용
- Web of Science 12
- JCR IF
- JCR 2007 1.457
- ISSN
- 0921-5093
저자
- Kim, H. H.부산대학교, 공과대학, Precis Mfg Syst Div, 정밀가공시스템전공, KO
- 강충길부산대학교, 공과대학, 기계공학부, KO
초록
Rheo-forging of metal offers not only superior mechanical strength but also requires significantly lower machine loads than solid forming processes. In order to produce semi-solid materials that have the desired microstructure, a stirring process is applied during solidification from molten state. During this process, air indraft can occasionally result in degradation of the mechanical properties of the semi-solid materials. As an attempt to offer a solution to this problem, this paper presents the results obtained from controlling the air during the stirring and forging stages of the rheo-forging process. Al6061 aluminum alloys were prepared by the process of electromagnetic stirring under vacuum in order to prevent the indraft of air. Samples of metal parts were subsequently fabricated with hydraulic press machinery. In order to compare the influence of air control, two types of samples were fabricated: (1) samples fabricated under vacuum and (2) samples fabricated while open to the atmosphere. (C) 2008 Elsevier B.V. All rights reserved.
식별자
- WoS UID
- 000262033300045



로그인
연구물 목록으로