Investigation of polishing characteristics of shallow trench isolation chemical mechanical planarization with different types of slurries
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q1
- 저널
- MICROELECTRONIC ENGINEERING84(4) · pp.626 · 2007
- 피인용
- Web of Science 21
- JCR IF
- JCR 2006 1.398
- ISSN
- 0167-9317
저자
- Lee, Sang-Ick제1저자삼성, KO
- Hwang, Jinho제1저자하이닉스반도체
- Kim, Hyoungjae제1저자한국생산기술연구원, KO
- 정해도교신저자부산대학교, 공과대학, 기계공학부, KO
초록
Ceria-based high selectivity slurry (HSS), which shows high polishing selectivity of silicon oxide to silicon nitride, was applied to the shallow trench isolation (STI) chemical mechanical planarization (CMP) process for giga-bit scale memory fabrication. While the wafer-to-wafer non-uniformity (WTWNU) and within-wafer non-uniformity (WIWNU) are superior to conventional silica-based slurry, the level of slurry induced scratches is too high for the ceria-based slurry to be used in present CMP processes. By optimizing the CMP process and filtering method, however, the number and depth of these scratches were reduced considerably to the level where the yield of gate oxide was sufficient to meet the requirement of manufacturing. In this paper, the authors discussed the possible causes of scratches when using ceria-based slurry and how these scratches affect to lower the breakdown yield of gate oxides. In addition, the authors investigated the relationship between within wafer non-uniformity and cell threshold voltage (V-t) variation and probe test 1 (PT1) yield variation. (c) 2006 Elsevier B.V. All rights reserved.
식별자
- WoS UID
- 000245613600013



로그인
연구물 목록으로