본문 바로가기

Investigation of turbulent flows in a waterjet intake duct using stereoscopic PIV measurements

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널
JOURNAL OF MARINE SCIENCE AND TECHNOLOGY11(4) · pp.270 · 2006
피인용
Web of Science 12
ISSN
0948-4280

저자

  1. 정광효부산대학교, 공과대학, 조선·해양공학과, KO
  2. 김경천부산대학교, 공과대학, 기계공학부, KO
  3. 윤상열부산대학교, 공과대학, 기계공학부, KO
  4. 권순홍부산대학교, 공과대학, 조선·해양공학과, KO
  5. 전호환부산대학교, 공과대학, 조선·해양공학과, KO
  6. 김문찬부산대학교, 공과대학, 조선·해양공학과, KO

초록

Stereoscopic particle image velocimetry measurements were made in a wind tunnel using a prototype waterjet model. The main wind tunnel provided the vehicle velocity and a secondary wind tunnel was set up as the waterjet propulsion model. Pressure distributions along the ramp and lip sides inside the duct were measured for three jet velocity to vehicle velocity ratios. Three-dimensional velocity fields were obtained at the intake entrance and the nozzle exit of the waterjet system. The flow into the duct was faster in the lip region than on the ramp side. Because of the variation in intake geometry from a rectangular to a circular section and because of the sudden curvature change on the lip side, a pair of counter-rotating vortices was observed in the mean velocity field at the nozzle exit. In addition, the turbulent kinetic energy correlated with the vortex pair was stronger on the lip side than in other areas. Dominant large-scale structures were extracted by using a snapshot proper orthogonal decomposition analysis. It was found that most of the turbulent kinetic energy was attributed to at least three vortices near the nozzle exit. This detailed three-dimensional velocity field will be useful for the verification of CFD simulations applied to the waterjet system.

식별자

WoS UID
000243057700006