본문 바로가기

Electro-optical characteristics of plasma display panel with Mg1-xSixO protecting thin films deposited by an electron-beam evaporation method

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널
APPLIED PHYSICS LETTERS89(19) · 2006
피인용
Web of Science 33
ISSN
0003-6951

저자

  1. 이돈규제1저자부산대학교, 공과대학, 전기공학과, 전기공학전공, KO
  2. 박정후부산대학교, 공과대학, 전기공학과, 전기공학전공, KO
  3. 이해준부산대학교, 공과대학, 전기공학과, 전기공학전공, KO
  4. 최우성부산대학교, 공과대학, 전기공학과, 전기공학전공, KO
  5. 김동현부산대학교, 공과대학, 전기공학과, 전기공학전공, KO
  6. 이호준부산대학교, 공과대학, 전기공학과, 전기공학전공, KO

초록

The effect of Si doping in MgO has been investigated in order to improve the material properties of the MgO protecting layer in plasma display panels. A small amount of Si was added to the MgO pellet while the MgO layer was being deposited by using an electron-beam evaporation method. Both the surface characteristics of the protecting layer and the electro-optical properties of 4 in. test panels were investigated, such as firing and sustain voltages, luminous efficacy, addressing jitter, and image sticking. The firing voltage is minimized when the Si concentration is 0.03%similar to 0.04%, where the luminous efficacy increases up to 35% compared with that of the conventional MgO film, and the boundary image sticking also shows good characteristics around the Si concentration level by 0.04%. (c) 2006 American Institute of Physics.

식별자

WoS UID
000241960400026