Skip to content

A strategy for low-carbon steelmaking: Combustion characteristics analysis of steel off-gases and ammonia co-firing

Document Type
Publications · Journal Article
Registered DB
SCIEScopus
Journal
FUEL428 · 2027
Citation
Web of Science 0Scopus 0
FWCI (Scopus)
0
ISSN
0016-2361

Authors

  1. Kim, Kyeong-HoFirst authorPusan Natl Univ, Pusan Clean Energy Res Inst, 2 Busandaehak Ro 63 Beon Gil, Pusan 46241, South Korea
  2. Ku, Min-JongPusan Natl Univ, Sch Mech Engn, 2 Busandaehak Ro 63 Beon Gil, Busan 46241, South Korea
  3. Hyeong-bin, JeongPusan Natl Univ, Sch Mech Engn, 2 Busandaehak Ro 63 Beon Gil, Busan 46241, South Korea
  4. Joonwoo, KweonPusan Natl Univ, Sch Mech Engn, 2 Busandaehak Ro 63 Beon Gil, Busan 46241, South Korea
  5. Lee, Byoung-HwaCorresponding authorPusan Natl Univ, Pusan Clean Energy Res Inst, 2 Busandaehak Ro 63 Beon Gil, Pusan 46241, South Korea
  6. Jeon, ChunghwanCorresponding authorPusan Natl Univ, Pusan Clean Energy Res Inst, 2 Busandaehak Ro 63 Beon Gil, Pusan 46241, South Korea

Abstract

Steelmaking off-gases, including coke oven gas (COG) and blast furnace gas (BFG), represent a significant source of recoverable chemical energy in the iron and steel industry. Co-firing these gases with ammonia (NH3), a carbon-free fuel, is a promising strategy for reducing CO2 emissions from steel mill power generation without requiring extensive infrastructure modifications. This study investigates the laminar flame speed and adiabatic flame temperature of COG and BFG over a range of equivalence ratios and NH3 blending levels. Chemical kinetic simulations were performed using the Okafor mechanism and validated against published data for CH4/H2/CO and CH4–NH3 mixtures. COG–NH3 co-firing maintained relatively high flame speeds because enhanced OH radical formation compensated for the loss in reactivity; for example, at 20 % NH3, the laminar flame speed was 114 cm/s, compared with 23 cm/s for pure NH3. In contrast, BFG–NH3 co-firing exhibited a narrow flammability range and combustion instability at intermediate NH3 blending ratios, with a laminar flame speed of only 10 cm/s at 20 % NH3. To provide experimental support and evaluate NOx formation, flow reactor combustion experiments were conducted for NH3, COG, BFG, and their blends under controlled equivalence ratios, and the exhaust gas was analyzed to quantify NOx emissions. Sensitivity analysis further identified the key radical reactions governing flame propagation and NOx formation for different fuel compositions. The results provide a scientific basis for designing NH3 co-firing strategies in steel mill boilers and support the development of low-carbon steelmaking technologies.

Keywords

AmmoniaChemistry mechanismCoke oven gasLaminar flame speedSteel off-gas

Identifiers

Scopus EID
2-s2.0-105043978185
WoS UID
001823598400001