Skip to content

WO3 hydrothermal synthesis for NO gas sensor

Document Type
Publications · Journal Article
Registered DB
SCIEScopus
Journal Ranking
JCR Q3Scopus Q2
Journal
JAPANESE JOURNAL OF APPLIED PHYSICS65(5) · #05SP17 · 2026
Citation
Web of Science 0Scopus 0
FWCI (Scopus)
0
JCR IF
JCR 2024 1.8
ISSN
0021-4922

Authors

  1. Yang, YijunFirst authorCorresponding authorKorea Inst Ind Technol KITECH, Adv Mobil Syst Grp, Daegu 42994, South Korea
  2. Jung, Dong GeonKorea Inst Ind Technol KITECH, Adv Mobil Syst Grp, Daegu 42994, South Korea
  3. Kong, Seong HoKyungpook Natl Univ, Sch Elect & Elect Engn, Daegu 41566, South Korea
  4. Jung, DaewoongPusan Natl Univ, Coll Nanosci & Nanotechnol, Dept Nanomechatron Engn, 2 Busandaehak Ro, Pusan 46241, South Korea

Abstract

In this study, NO gas sensors based on hydrothermally synthesized tungsten oxide (WO3) nanomaterials were successfully fabricated and characterized. Specifically, by systematically varying the hydrothermal synthesis time at 4, 8, 12, and 16 h, we investigated the effects of synthesis time on the morphology and structure of the WO3 nanomaterials and their NO gas sensing performance. The NO gas sensing performance of the WO3 sensor was highest at the optimal operating temperature of 150 degrees C. The optimized WO3 sensor exhibited a peak response of 67.96 towards 10 ppm NO gas. Furthermore, the optimized WO3 sensor demonstrated a low limit of detection of approximately 0.04 ppm for NO gas, and stable repeatability over 40 repeated cycles. The sensor exhibited selectivity toward NO compared to ethanol, hydrogen, and carbon oxide, which was clearly validated using principal component analysis. These findings propose that morphology-controlled WO3 is a promising material for NO detection applications.

Keywords

tungsten oxidenitric oxidehydrothermal synthesisSENSING PERFORMANCENANOSTRUCTURESMORPHOLOGIESCHALLENGES

Identifiers

Scopus EID
2-s2.0-105043850565
WoS UID
001707995100001