Skip to content

High-Yield-Stress Particle-Stabilized Emulsion for Form-Factor-Free Thermal Pastes with High Thermal Conductivity, Stability, and Recyclability

Document Type
Publications · Journal Article
Registered DB
SCIEScopus
Journal Ranking
JCR Q2Scopus Q1
Journal
ADVANCED MATERIALS INTERFACES11(6) · 2024
Citation
Web of Science 16Scopus 15
FWCI (Scopus)
1.41
JCR IF
JCR 2023 4.3
ISSN
2196-7350

Authors

  1. Seong-Bae MinFirst authorPusan Natl Univ, Sch Chem Engn, Pusan 46241, South Korea
  2. Jo YoungsuPusan Natl Univ, Sch Chem Engn, Pusan 46241, South Korea
  3. Ryu, Seoung YoungMyongji Univ, Dept Chem Engn, Yongin 17058, South Korea
  4. Lee, JoohyungCorresponding authorMyongji Univ, Dept Chem Engn, Yongin 17058, South Korea
  5. Ahn, Cheol-WooCorresponding authorKorea Inst Mat Sci KIMS, Funct Ceram Dept, Ceram Mat Div, Chang Won 51508, South Korea
  6. Kim, Chae BinCorresponding authorPusan Natl Univ, Sch Chem Engn, Pusan 46241, South Korea

Abstract

Thermal pastes, thermally conductive fillers dispersed in liquid matrices, are widely used as thermal interface materials (TIMs). TIMs transfer heat generated from electronics to the surroundings, ensuring optimal operating temperatures. Thus, it is crucial to obtain high thermal conductivity (TC) by forming a continuous heat-conduction pathway through interconnected filler-networks within the TIM. Therefore, for paste-type TIMs with spherical fillers, high TC can only be realized at sufficiently high filler loadings (>60 vol%). However, the pastes bearing such high filler loadings are thick, stiff, and less applicable. To these ends, particle-stabilized emulsions composed of immiscible liquids (silicone oil and glycerol) and spherical alumina are utilized as thermal pastes. Owing to this structure, the resulting form-factor-free thermal paste exhibits higher TC and stability than a simple mixture consisting of alumina and a single-liquid-matrix (either silicone oil or glycerol). Furthermore, the high applicability of the emulsion-type pastes enables syringe extrusion, 3D printing, multiple cycles of reprocessing/molding, and eco-friendly recycling.

Keywords

form-factor-free pastesPickering emulsionrecyclingsegregated filler structuresthermal pastesINTERFACE MATERIALSGRAPHENE OXIDECOMPOSITESPERSPECTIVEPERFORMANCEGREASE

Identifiers

Scopus EID
2-s2.0-85179362553
WoS UID
001120671100001