Skip to content

Conductive and Mechanical Properties Study of Ti-doped DLC (ta-C:Ti) Film on Semiconductor Probe through Taguchi Bobust Design

다구찌 강건 설계를 통한 반도체 Probe상 Ti 도핑된 DLC(ta-C:Ti) 코팅 막의 전도성 및 기계적 물성 연구

Document Type
Publications · Journal Article
Registered DB
KCI
Journal Ranking
KCI Q3
Journal
한국트라이볼로지학회지38(6) · pp.274 · 2022
Citation
KCI 0
ISSN
2713-8011

Authors

  1. 김도영First author한국기술교육대학교 에너지신소재화학공학부 학부생
  2. 신준기부산대학교 바이오산업기계공학과
  3. 장영준한국재료연구원
  4. 김종국Corresponding author한국재료연구원

Abstract

There is a problem that semiconductor probe pin has a short lifespan. In order to solve this problem, Ti having excellent conductivity was doped to tetrahedral amorphous carbon (ta-C) having excellent hardness and abrasion resistance. This experiment was planned through the Taguchi robust design to determine the effect of the control factor of the ta-C:Ti coating film. The effect and contribution of control factors such as Unbalanced Magnetron Sputter(UBM) discharge current, arc discharge current, temperature, and bias voltage on ta-C:Ti characteristics were analyzed from the perspective of electrical and mechanical characteristics. The UBM discharge current was set to 4, 6, and 8 A. The main control factor of thickness and resistance is the UBM discharge current, and the thickness increased and the resistance decreased as the current increased. The decrease in resistance is due to the increase in the Ti content of the ta-C:Ti coating film. The arc discharge current was set to 60, 80, and 100 A. The main control factor of hardness and wear is the arc discharge current, and as the current rises, the hardness increases and the wear area decreases. This is due to the increased ta-C content of the ta-C:Ti coating film. Since resistance and wear are important for Probe Pin, the optimal level is set from the perspective of resistance and wear and a confirmation experiment is conducted.

Keywords

다구찌 강건 설계Ti 도핑 ta-C전도성경도마모Taguchi robust designta-C:TiConductiveHardnesswear

Identifiers

KCI
ART002918421