Skip to content

High-Dispersed V2O5-CuOX Nanoparticles on h-BN in NH3-SCR and NH3-SCO Performance

Document Type
Publications · Journal Article
Registered DB
SCIEScopus
Journal Ranking
JCR Q1Scopus Q1
Journal
NANOMATERIALS12(14) · 2022
Citation
Web of Science 24Scopus 25
FWCI (Scopus)
1.26
JCR IF
JCR 2021 5.719
ISSN
2079-4991

Authors

  1. Im Han GyuFirst authorPusan Natl Univ, Dept Mat Sci & Engn, Busan 46241, South Korea
  2. Lee, Myeung-jinKorea Inst Ind Technol, Ind Environm Green Deal Agcy, Ulsan 44413, South Korea
  3. Kim Woon GiPusan Natl Univ, Dept Mat Sci & Engn, Busan 46241, South Korea
  4. Kim, Su-JinKorea Inst Ind Technol, Ind Environm Green Deal Agcy, Ulsan 44413, South Korea
  5. Bora JeongKorea Inst Ind Technol, Ind Environm Green Deal Agcy, Ulsan 44413, South Korea
  6. Ye, BoraKorea Inst Ind Technol, Ind Environm Green Deal Agcy, Ulsan 44413, South Korea
  7. Lee, HeesooCorresponding authorPusan Natl Univ, Dept Mat Sci & Engn, Busan 46241, South Korea
  8. Kim, Hong-DaeCorresponding authorKorea Inst Ind Technol, Ind Environm Green Deal Agcy, Ulsan 44413, South Korea

Abstract

© 2022 by the authors. Licensee MDPI, Basel, Switzerland.Typically, to meet emission regulations, the selective catalytic reduction of NOX with NH3 (NH3-SCR) technology cause NH3 emissions owing to high NH3/NOX ratios to meet emission regulations. In this study, V-Cu/BN-Ti was used to remove residual NOX and NH3. Catalysts were evaluated for selective catalytic oxidation of NH3 (NH3-SCO) in the NH3-SCR reaction at 200–300◦C. The addition of vanadium and copper increased the number of Brønsted and Lewis acid sites available for the reaction by increasing the ratio of V5+ and forming Cu+ species, respectively. Furthermore, h-BN was dispersed in the catalyst to improve the content of vanadium and copper species on the surface. NH3 and NOX conversion were 98% and 91% at 260◦C, respectively. Consequently, slipped NH3 (NH3-Slip) emitted only 2% of the injected ammonia. Under SO2 conditions, based on the NH3 oxidation reaction, catalytic deactivation was improved by addition of h-BN. This study suggests that h-BN is a potential catalyst that can help remove residual NOX and meet NH3 emission regulations when placed at the bottom of the SCR catalyst layer in coal-fired power plants.

Keywords

hexagonal boron nitrideNH3-Slipselective catalytic oxidationselective catalytic reductionV-Cu-based catalystSELECTIVE CATALYTIC-REDUCTIONHEXAGONAL BORON-NITRIDEAMMONIAOXIDATIONCUNITROGENSCRNOXFEABSORPTION

Identifiers

Scopus EID
2-s2.0-85133433417
WoS UID
000833116800001