Skip to content

Sonochemical synthesis of welded titanium dioxide-silver nanocomposite as a 3-dimensional direct ink writing printed cathode electrode material for high-performance supercapacitor

Document Type
Publications · Journal Article
Registered DB
SCIEScopus
Journal Ranking
JCR Q1Scopus Q1
Journal
JOURNAL OF ENERGY STORAGE45 · #103524 · 2022
Citation
Web of Science 22Scopus 23
FWCI (Scopus)
1.24
JCR IF
JCR 2021 8.907
ISSN
2352-152X

Authors

  1. Alam, AsrarFirst authorJeonbuk Natl Univ, LANL JBNU Engn Inst, Dept Flexible & Printable Elect, Jeonju 54896, South Korea
  2. Saeed, GhuzanfarPusan Natl Univ, Sch Mat Sci & Engn, Busan 46241, South Korea
  3. Kim, Kwang HoCorresponding authorPusan Natl Univ, Sch Mat Sci & Engn, Busan 46241, South Korea
  4. Lim, SoomanCorresponding authorJeonbuk Natl Univ, LANL JBNU Engn Inst, Dept Flexible & Printable Elect, Jeonju 54896, South Korea

Abstract

Using a facile ultra-sonication method, Ag nanoparticles are embedded into TiO2 nanoparticles, and the as-developed composite material is 3D printed through direct ink writing (DIW) process as an electrode material for supercapacitor. The as-printed TiO2-Ag composite electrode displayed a lower contact angle value of 32.2 degrees, with higher surface energy of 76.32 mJ m(-2). The electrochemical performance of the TiO2 nanoparticles incorporated with silver nano-powder is improved significantly in-comparison to pristine TiO2 nanoparticles. The significant improvement in the electrochemical performance of the TiO2 nanoparticles with the incorporated silver nano-powder is due to the synergistic interaction between the TiO2 nanoparticles and the silver nano-powder developed through sonochemical process. The plain TiO2 and TiO2-Ag composite printed electrode revealed a maximum specific capacitance (specific capacity) values of 148.43 (56.84 mA h mg(-1)) and 257.8 (122.96 mA h mg(-1)) F g(-1) at 1 A g(-1), respectively. TiO2-Ag composite printed electrode also maintained a capacitance retention of 58.3% at a higher current density of 10 A g(-1). The electrochemical impedance spectroscopy study also confirms that the incorporation of silver nano-powder into TiO2 nanoparticles reduces charge transfer resistance (R-ct). The TiO2-Ag nanocomposite electrode shows excellent long-term cycling stability with 96% of capacitance retention after 3,000 continuous GCD cycles. Moreover, TiO2-Ag//AC based asymmetric supercapacitor device is developed which delivers a high energy density of 26.72 W h Kg(-1) at minimum power density of 655.61 W kg(-1). These results indicate a high potential of the as-printed TiO2-Ag composite electrode material for energy storage applications.

Keywords

ENERGY-STORAGENANOSHEETS

Identifiers

Scopus EID
2-s2.0-85118753052
WoS UID
000780265800004