Skip to content

Monitoring of Misfiring Status of Ship Engines Using Minute Speed Changes in the Crankshaft

크랭크축의 미세속도변화를 이용한 선박엔진의 착화불량 상태 감시

Document Type
Publications · Journal Article
Registered DB
KCIScopus
Journal Ranking
KCI Q4
Journal
센서학회지31(1) · pp.51 · 2022
Citation
Scopus 1KCI 1
FWCI (Scopus)
0.09
ISSN
1225-5475

Authors

  1. KANG Ho hyeonFirst author부산대학교
  2. Kim, Hwa-YoungCorresponding author부산대학교
  3. Ahn, Junghwan부산대학교

Abstract

In this study an efficient method for detecting and monitoring engine misfiring, focusing on minute speed changes in the crankshaft is proposed., Its validity is verified using various misfiring cases. Typically, the crankshaft speed fluctuates around the normal value depending on the engine misfiring status. Even a minute speed change in the crankshaft can be estimated by measuring the rotation time of each tooth of the 118-tooth flywheel attached to the crankshaft with a 2-MHz timer. Therefore, a speed pattern for an in-line six-cylinder engine consists of 236 tooth rotation speeds corresponding to the two rotations of the crankshaft, in which all the cylinders complete four-stroke cycle. FFT analysis can reduce the number of components of a speed pattern from 236 to just four major components: – fundamental frequency_(f), 2f, 3f, 6f., – This makes the comparison of the misfiring cases simpler and faster. In the experiment, five engine status cases (one normal firing and, four misfiring cases) were simulated. While the 6f component was the largest for the normal case, the f component increased as misfiring occurred one, two apart, and two consecutive times. The 3D FFT pattern comprising the ratio of f, 2f, and 3f, 6f showed that the distance between the misfiring and normal states was larger.

Keywords

MisfiringMornitoringSpeed change of crankshaftFlywheel toothShip engineFFT(Fast Fourier Transform) Pattern

Identifiers

Scopus EID
2-s2.0-85166905206
KCI
ART002809552