Skip to content

Enhancing Toughness and Impact Strength of Epoxy Resins by Using Hyperbranched Polymers

Document Type
Publications · Journal Article
Registered DB
SCIEScopus
Journal Ranking
JCR Q2Scopus Q2
Citation
Web of Science 23Scopus 25
FWCI (Scopus)
0.67
JCR IF
JCR 2020 2.642
ISSN
1687-9422

Authors

  1. Park HangyuFirst authorPusan Natl Univ, Dept Polymer Sci & Chem Engn, Busan 609735, South Korea
  2. Choe, YoungsonCorresponding authorPusan Natl Univ, Dept Polymer Sci & Chem Engn, Busan 609735, South Korea

Abstract

© 2021 Hangyu Park and Youngson Choe.Toughened epoxy has been widely used in industrial areas such as automotive and electronics. In this study, nanosized hyperbranched polymers (HBPs) as a flexibilizer are synthesized and embedded into epoxy resin to enhance the toughness and flexibility. Two different HBPs, hyperbranched poly(methylacrylate-diethanolamine) (poly(MA-DEA)) and poly(methylacrylate-ethanolamine) (poly(MA-EA)), were prepared and blended with both epoxy and polyetheramine, a curing agent. The molecular size of HBPs was estimated to be 6 14 nm in diameter. The molecular weight of HBPs ranges from 1500(1.5 K) to 7000(7.0 K) g/mol. In cured epoxy/HBP blends, no phase separations are occurred, indicating that HBPs possess sufficient miscibility with epoxy. The tensile toughness of the blends increased with changing the molecular weight of HBPs without sacrificing tensile strengths. The impact strength of the blends increases stiffly until the loading % of HBPs in the blends reaches 10 wt%. In addition, the experimental studies showed that impact resistance also increased with an increase in molecular weight of HBPs. The obtained impact resistance of the epoxy/HBP blends with 10 wt% was 270% more effective compared to that of cured neat epoxy.

Keywords

PHASE-SEPARATIONPOLY(2,6-DIMETHYL-1,4-PHENYLENE ETHER)MECHANICAL-PROPERTIESPOLY(ETHER SULFONE)REACTIVE SOLVENTSPERFORMANCEMORPHOLOGYBLENDSMISCIBILITY

Identifiers

Scopus EID
2-s2.0-85122261556
WoS UID
000742587400001