Skip to content

Development of a special thermal-hydraulic component model for the core makeup tank

Document Type
Publications · Journal Article
Registered DB
KCISCIEScopus
Journal Ranking
JCR Q1Scopus Q2KCI Q2
Journal
NUCLEAR ENGINEERING AND TECHNOLOGY54(5) · pp.1890 · 2022
Citation
Web of Science 5Scopus 9KCI 1
FWCI (Scopus)
0.75
JCR IF
JCR 2021 2.817
ISSN
1738-5733

Authors

  1. Kim Min GiFirst authorPusan Natl Univ, Sch Mech Engn, Busan 46241, South Korea
  2. Adnan WisudhaputraPusan Natl Univ, Sch Mech Engn, Busan 46241, South Korea
  3. Lee, Jong-HyukKorea Atom Energy Res Inst KAERI, Daeduk Daero 34057, Daejeon, South Korea
  4. Kim, KyungdooKorea Atom Energy Res Inst KAERI, Daeduk Daero 34057, Daejeon, South Korea
  5. Park, Hyun-SikKorea Atom Energy Res Inst KAERI, Daeduk Daero 34057, Daejeon, South Korea
  6. Jeong, Jae JunCorresponding authorPusan Natl Univ, Sch Mech Engn, Busan 46241, South Korea

Abstract

© 2021 Korean Nuclear SocietyWe have assessed the applicability of the thermal-hydraulic system analysis code, SPACE, to a small modular reactor called SMART. For the assessment, the experimental data from a scale-down integral-test facility, SMART-ITL, were used. It was conformed that the SPACE code unrealistically calculates the safety injection flow rate through the CMT and SIT during a small-break loss-of-coolant experiment. This unrealistic behavior was due to the overprediction of interfacial heat transfer at the steam-water interface in a vertically stratified flow in the tanks. In this study, a special thermal-hydraulic component model has been developed to realistically calculate the interfacial heat transfer when a strong non-equilibrium two-phase flow is formed in the CMT or SIT. Additionally, we developed a special heat structure model, which analytically calculates the heat transfer from the hot steam to the cold tank wall. The combination of two models for the tank are called the special component model. We assessed it using the SMART-ITL passive safety injection system (PSIS) test data. The results showed that the special component model well predicts the transient behaviors of the CMT and SIT.

Keywords

Core makeup tankInterfacial heat transferSpecial component modelThermal non-equilibriumVertical stratified flowCODE

Identifiers

Scopus EID
2-s2.0-85120820606
WoS UID
000787858000001
KCI
ART002832104