Skip to content

A Wideband Sub-GHz Receiver Front-end Supporting High Sensitivity and Selectivity Mode

Document Type
Publications · Journal Article
Registered DB
KCISCIEScopus
Journal Ranking
JCR Q4Scopus Q4KCI Q4
Citation
Web of Science 0Scopus 0KCI 0
FWCI (Scopus)
0
JCR IF
JCR 2020 0.474
ISSN
1598-1657

Authors

  1. Nam, IlkuFirst authorPusan Natl Univ, Dept Elect Engn, Busan 609735, South Korea
  2. Lee, OckgooPusan Natl Univ, Dept Elect Engn, Busan 609735, South Korea
  3. Im, DongguCorresponding authorJeonbuk Natl Univ, Div Elect Engn, Jollabuk Do 561756, South Korea

Abstract

A low noise and highly linear wideband RF front-end circuit for sub-GHz Internet of Things (IoT) applications is proposed. The proposed front-end is composed of a broadband single-ended LNA, a wideband differential LNA employing thermal noise cancellation technique, and an in-phase and quadrature (I/Q) linearized harmonic rejection mixer (HRM). Depending on the interference environment, the proposed front-end supports two operation modes having high sensitivity and selectivity performance by enabling or disabling the first building block of the single-ended LNA. At high sensitivity mode, the front-end shows a voltage gain (Av) of greater than 38 dB, a noise figure (NF) of less than 2.1 dB, an input-referred third-order intercept point (IIP3) of greater than -23 dBm, and an input-referred second-order intercept point (IIP2) of greater than +15 dBm in the sub-GHz frequency band. Concerning for high selectivity mode, it achieves an Av of greater than 22.5 dB, a NF of less than 4.7 dB, an IIP3 of greater than –6.8 dBm, and an IIP2 of greater than +50 dBm over the same operating frequency range.

Keywords

CMOSfront-endharmonic rejection mixerlow noise amplifier (LNA)sub-GHzwidebandNOISELNA

Identifiers

Scopus EID
2-s2.0-85126802126
WoS UID
000780231900004
KCI
ART002745457