Skip to content

Improved thermal stability of SiCf/SiC ceramic matrix composites fabricated by PIP process

Document Type
Publications · Journal Article
Registered DB
SCIEScopus
Journal Ranking
JCR Q2Scopus Q3
Journal
PROCESSING AND APPLICATION OF CERAMICS15(2) · pp.164 · 2021
Citation
Web of Science 16Scopus 16
FWCI (Scopus)
0.37
JCR IF
JCR 2020 1.804
ISSN
1820-6131

Authors

  1. Cu, JianFirst authorPusan Natl Univ, Dept Mat Sci & Engn, Busan, South Korea
  2. Lee, Sea-HoonKorea Inst Mat Sci, Div Powder & Ceram Res, Chang Won, South Korea
  3. Kim, DaejongKorea Atom Energy Res Inst, Nucl Mat Dev Div, Daejeon, South Korea
  4. Lee, HeesooCorresponding authorPusan Natl Univ, Dept Mat Sci & Engn, Busan, South Korea
  5. Kim, Jun-SeopCorresponding authorKorea Inst Mat Sci, Div Powder & Ceram Res, Chang Won, South Korea

Abstract

Improvement of the thermal stability of continuous SiC fiber reinforced SiC ceramic matrix composites (SiCf/SiC CMC) by the pre-treatment of SiC fillers and the suppression of oxidation during polymer impregnation and pyrolysis (PIP) process were investigated. Dense SiCf/SiC CMCs were fabricated using the slurry infiltration and PIP process under a purified argon atmosphere. Structure and mechanical properties of the SiCf/SiC CMC heated at different temperatures were evaluated. The flexural strength of the SiCf/SiC CMC decreased only 15.3% after heating at 1400 degrees C, which exhibited a clear improvement compared with the literature data (49.5% loss), where severe thermal deterioration of SiCf/SiC composite occurred at high temperatures by the crystallization and decomposition of the precursor-derived ceramic matrix. The thermal stability of the SiCf/SiC CMC fabricated by PIP process was improved by the pre-treatment of SiC fillers for removing oxides and the strict atmosphere control to prevent oxidation.

Keywords

SiCf/SiC CMCPIPSiC fillerthermal stabilitySIC FIBERINFILTRATION

Identifiers

Scopus EID
2-s2.0-85111710618
WoS UID
000704294400007