Skip to content

Defect Imaging Enhancement through Optimized Shape Factors of the RAPID Algorithm Based on Guided Wave Beam Pattern Analysis

Document Type
Publications · Journal Article
Registered DB
SCIEScopus
Journal Ranking
JCR Q1Scopus Q1
Journal
SENSORS21(12) · 2021
Citation
Web of Science 9Scopus 8
FWCI (Scopus)
0.37
JCR IF
JCR 2020 3.576
ISSN
1424-3210

Authors

  1. Yonghee LeeFirst authorGraduate School of Mechanical System Design, Pusan National University, Busan, 46241, Korea;
  2. Cho, YounhoCorresponding authorGraduate School of Mechanical System Design, Pusan National University, Busan, 46241, Korea;

Abstract

In this study, a modified imaging algorithm was implemented to improve the imaging accuracy for defects located on a structure. Based on analysis of the Lamb wave mode, a guided ultrasonic wave inspection technique was applied, which was able to illustrate images of defects in a 6 mm steel plate simulating containment liner plate (CLP) in nuclear power plants. The dominant Lamb wave mode was determined through short-time Fourier transform waveform analysis and imaging verification. Following tomography verification, limitations of the antisymmetric mode in the thick steel plate were identified. In addition, a modified shape factor, based on the energy distribution factor according to the beam pattern and beam width, was suggested for field applications and improved imaging accuracy. Results of the analysis revealed a beam skewing phenomenon for the Lamb wave mode. In the case of S0 2.7 MHz center dot mm, skewing as well as distortion effects are not observed in the experiment, while the S0 modes at 2.64 and 2.74 MHz center dot mm show either of them. Considering skewing width, the size of the shape function was modified. Application of the modified shape function allows us to obtain more accurate image to actual defect shape.

Keywords

tomographyimage modificationmode verificationguided wavebeam pattern analysissignal processingTOMOGRAPHY

Identifiers

Scopus EID
2-s2.0-85107596822
WoS UID
000666469000001