Skip to content

Study on microstructure and its correlation with sheet resistance of Zn-Al metallized film

Document Type
Publications · Journal Article
Registered DB
SCIEScopus
Journal Ranking
JCR Q2Scopus Q2
Journal
SURFACE ENGINEERING37(8) · pp.1051 · 2021
Citation
Web of Science 9Scopus 11
FWCI (Scopus)
0.22
JCR IF
JCR 2020 3.169
ISSN
0267-0844

Authors

  1. Yang, YingFirst authorKey Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials, Ministry of Education, Anhui University of Technology, Ma’anshan, People’s Republic of China
  2. Huang, HeKey Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials, Ministry of Education, Anhui University of Technology, Ma’anshan, People’s Republic of China
  3. Wang, FangKey Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials, Ministry of Education, Anhui University of Technology, Ma’anshan, People’s Republic of China
  4. Zheng, JunCorresponding authorKey Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials, Ministry of Education, Anhui University of Technology, Ma’anshan, People’s Republic of China
  5. Wang, JinbingAnhui Saifu Electronics CO., LTD, Tongling, People’s Republic of China
  6. Tang, ZeboAnhui Saifu Electronics CO., LTD, Tongling, People’s Republic of China
  7. Zhou, FengAnhui Saifu Electronics CO., LTD, Tongling, People’s Republic of China
  8. Chen, MohanSchool of Materials Science and Engineering, Pusan National University, Busan, Republic of Korea
  9. Wang, QiminCorresponding authorKey Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials, Ministry of Education, Anhui University of Technology, Ma’anshan, People’s Republic of China

Abstract

Zn-Al film was prepared on biaxially oriented polypropylene (BOPP) substrate via vacuum thermal evaporation. The microstructure and its correlation with sheet resistance of Zn-Al film were explored systematically. The results showed that the macromorphology of Zn-Al film was closely related to the surface topography of BOPP substrate. XRD and SEM analysis indicated that Zn-Al film displayed a columnar and strong textured structure of Zn (002). TEM results revealed that the film thickness was in the range of 20-25 nm, of which amorphous alumina was identified on/at the surface and interface, while Zn and a small amount of ZnO were detected in the middle. The amorphous alumina on the film surface prevented the further oxidation of Zn, and therefore helped to improve the stability of sheet resistance of the film. Nevertheless, the insulative alumina significantly decreased the film conductivity, which deteriorated the current handling ability of metallized film capacitors.

Keywords

Metallized film capacitorZn-Al metallized filmthermal evaporationmicrostructuresheet resistanceTHIN-FILMSDEGRADATION

Identifiers

Scopus EID
2-s2.0-85105879172
WoS UID
000648469100001