Microstructure and wettability of novel Al-containing diamond-like carbon films deposited by a hybrid sputtering system
- Document Type
- Publications · Journal Article
- Registered DB
- SCIEScopus
- Journal Ranking
- JCR Q1Scopus Q1
- Journal
- JOURNAL OF ALLOYS AND COMPOUNDS868 · 2021
- Citation
- Web of Science 25Scopus 26
- FWCI (Scopus)
- 1.51
- JCR IF
- JCR 2020 5.316
- ISSN
- 0925-8388
Authors
- Ding, Ji ChengFirst authorGlobal Frontier R&D Center for Hybrid Interface Materials, Pusan National University, Busan, 46241, South Korea
- Mei, HaijuanGuangdong Provincial Key Laboratory of Electronic Functional Materials and Devices, Huizhou, University, Huizhou 516007, China
- Zheng, JunResearch Center of Modern Surface and Interface Engineering, Anhui University of Technology, Maanshan 243002, China
- Wang, Qi MinSchool of Electromechanical Engineering, Guangdong University of Technology, Guangzhou, 510006, China
- Kang, MyungchangGlobal Frontier R&D Center for Hybrid Interface Materials, Pusan National University, Busan, 46241, South Korea
- Zhang, Teng FeiCorresponding authorSchool of Electromechanical Engineering, Guangdong University of Technology, Guangzhou, 510006, China
- Kim, Kwang HoCorresponding authorGlobal Frontier R&D Center for Hybrid Interface Materials, Pusan National University, Busan, 46241, South Korea
Abstract
Al-doped diamond-like carbon (DLC) films having various Al contents were fabricated by a co-sputtering system. The designed Al target power was increased from 10 to 70 W to obtain different Al contents. The effect of Al content on the surface morphologies, carbon bonding structure, residual stress, and the wetting property of films was systematically investigated. The results show that the Al content in films increased with increasing the sputtering power of Al target, and the surface roughness of the films increased with increase of Al content. It was also found that the carbon bond, including sp(2)-C and sp(3)-C bonds, was a function of the Al content. The sp(2)-C bond fraction and the ratio of sp(2)/sp(3) increased with increasing Al content, implying more graphitization in the films. Meanwhile, the residual stress of films decreased by adding Al content. In addition, the contact angles of the films increased from 68.8 degrees for the pure DLC film to 107.7 degrees for the film with moderate Al doping, implying that the wettability of the films transformed from the hydrophilicity state to the hydrophobicity state. Accordingly, the surface energy of the films decreased from 42.45 to 18.43 mJ/m(2). This change was attributed to the improved sp(2)-C bond fraction and surface roughness of the films. The findings of this study provide a feasible method of designing and fabricating DLC films with low residual stress and controllable wettability properties. (C) 2021 Elsevier B.V. All rights reserved.
Keywords
Diamond-like carbonAl-containingCarbon bonding characteristicResidual stressWettability
Identifiers
- Scopus EID
- 2-s2.0-85101344332
- WoS UID
- 000636039600050



Login
Back to Publication list