Skip to content

Combined application of patchwork and partial softening to enhance the collision resistance of the center pillar

Document Type
Publications · Journal Article
Registered DB
SCIEScopus
Journal Ranking
JCR Q4Scopus Q2
Journal
INTERNATIONAL JOURNAL OF CRASHWORTHINESS27(3) · pp.688 · 2022
Citation
Web of Science 4Scopus 4
FWCI (Scopus)
0.19
JCR IF
JCR 2021 1.472
ISSN
1358-8265

Authors

  1. Lee, Min-sikFirst authorSchool of Mechanical Engineering, Pusan National University, Busan, Republic of Korea
  2. Lim, Ok DongAutogen Co. Ltd, Gyeonggi-do, Republic of Korea
  3. Kang, Chung GilSchool of Mechanical Engineering, Pusan National University, Busan, Republic of Korea
  4. Moon, YounghoonCorresponding authorSchool of Mechanical Engineering, Pusan National University, Busan, Republic of Korea

Abstract

Hot press formed parts in a fully martensitic structure limit its application in the centre pillar, which requires high collision resistance. In this study, the combined effect of the patchwork and partial softening on the collision characteristics of the centre pillar, such as impulse, absorbed energy, and intrusion displacement, were investigated both experimentally and numerically. The partial softening process was used to provide ductility, while the patchwork was attached to improve the stiffness during impact loading. The energy absorption was assessed by integrating unit element deformation during impact. When patchwork and partial softening were applied to the centre pillar simultaneously, the anti-intrusion and absorbed energy were improved remarkably by 20.0% and 20.3%, respectively. The combined application of patchwork and partial softening is a feasible alternative for enhancing the collision resistance of the centre pillar with high degree of reliability.

Keywords

Center pillarpartial softeningpatchworkenergy absorptioncollision resistanceQUENCHED BORON STEELTAILORED BLANKSHOTFORMABILITYDESIGN

Identifiers

Scopus EID
2-s2.0-85093682682
WoS UID
000582154600001