Partially crosslinked comb-shaped PPO-based anion exchange membrane grafted with long alkyl chains: Synthesis, characterization and microbial fuel cell performance
- Document Type
- Publications · Journal Article
- Registered DB
- SCIEScopus
- Journal Ranking
- JCR Q2Scopus Q1
- Journal
- INTERNATIONAL JOURNAL OF HYDROGEN ENERGY45(51) · pp.27346 · 2020
- Citation
- Web of Science 42Scopus 45
- FWCI (Scopus)
- 0
- JCR IF
- JCR 2019 4.939
- ISSN
- 0360-3199
Authors
- Mohanty, Aruna KumarFirst authorDepartment of Polymer Science and Engineering, Pusan National University, Busan, 46241, Republic of Korea
- Song Young EunSchool of Chemical and Biomolecular Engineering, Pusan National University, Busan, 46241, Republic of Korea
- Jung, BoramDepartment of Environmental Engineering, Dong-eui University, Busan, 47340, Republic of Korea
- Kim, Jung-RaeSchool of Chemical and Biomolecular Engineering, Pusan National University, Busan, 46241, Republic of Korea
- Kim, NowonCorresponding authorDepartment of Environmental Engineering, Dong-eui University, Busan, 47340, Republic of Korea
- Paik, Hyun-jongCorresponding authorDepartment of Polymer Science and Engineering, Pusan National University, Busan, 46241, Republic of Korea
Abstract
Anion exchange membranes (AEMs) with higher ion exchange capacities (IECw) are limited to applications due to excessive swelling and higher water uptake. Crosslinked macromolecular structures have been a strategy to balance between ionic conductivity and swelling in membranes. However, highly crosslinked AEMs are usually mechanically brittle and poorer in ion transport. Thus we report a series of partially diamine crosslinked (X = 10%, 15%, 20%) comb-shaped AEMs functionalized with dimethylhexadecylammonium groups exhibiting improved flexibility, water uptake and swelling properties over conventional un-crosslinked or fully crosslinked materials. The higher conductivities in these PPO AEM(X) (for example, X = 20%, IECw = 1.96 mmol/g, s(OH-) similar to 67 mS/cm at 80 degrees C) are attributed to the distinct nanophase separation as observed in SAXS and AFM analyses. Finally, the microbial fuel cell performances of the membranes were compared with commercially available cation and anion exchange membranes. (C) 2020 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
Keywords
Anion exchange membraneQuaternary ammoniumAnion conductivityMicrobial fuel cellPOLY(2,6-DIMETHYL-1,4-PHENYLENE OXIDE)POLYMER ELECTROLYTEIMIDAZOLIUMSTABILITYIONOMERSCATION
Identifiers
- Scopus EID
- 2-s2.0-85089138547
- WoS UID
- 000578042500066



Login
Back to Publication list